1. Large transmission ratio and compact structure.2. The transmission system operates smoothly and noiselessly. This is because the worm gear teeth are continuous helical teeth, which mesh with the gear teeth in a continuous manner. The worm gear teeth do not engage or disengage, thus ensuring smoot
The characteristics and differences between worm gear and belt drives. Here, let me, the editor of Jiaoxing Drive, summarize them. The main differences and characteristics are as follows: worm gear drives have a larger transmission ratio, while belt drives have a smaller one; worm gear drives are ve
Tooth tip circle: The circle passing through all the tooth tips of a gear is called the tooth tip circle. Its radius is represented by ra, and its diameter is represented by da.Root circle: The circle that passes through the bottom edge of all tooth slots becomes the root circle. Its radius is repre
In the automotive industry, couplings and clutches are important components used to achieve power transmission between two or more components, but they have significant differences in their working principles and usage scenarios.The main function of a coupling is to connect two or more shafts and ro
"The mechanical structure of the joint robot is mainly composed of four parts: body, arm, wrist and hand. Each part has several degrees of freedom to form a multi freedom mechanical system. The end manipulator is an important component directly installed on the wrist. It can be a multi finger c
When the NC machine tool is not used for a long time, the machine tool shall be sealed according to the regulations. Clean the inside and outside of the CNC system, put on the protective cover and cut off the power supply. If the CNC system is idle for a long time, it needs to be powered on frequent
